Titanium Male Connector

Titanium Male Connector

Titanium Male Connector Titanium Connector Fittings

Fav is the manufacturer and exporter of Titanium GR 2 Male Connector which is a part of our titanium compression fitting range.

Standard sizes available are ¼”, 3/8”, ½” & ¾” threading’s available are NPT,BSP,BSPT

Standard sizes for tube side available are ¼” 3/8” ½” ¾” and 4mm 6mm 8mm 10mm 12mm.

Titanium Male Connector Titanium Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate. Ti Grade 2 has also been widely used in marine and chemical applications such as condensers, evaporators, reaction vessels for chemical processing, tubing and tube headers in desalinization plants, and cryogenic vessels. Other uses have included items such as jigs, baskets, cathodes and starter-sheet blanks for the electroplating industry, and a variety of medical application for Male Connector         

You can also visit our Pipe Plug section for alternative modes for connecting tubes.

For information about Manifold Valve click here.


The high strength, low weight ratio and outstanding corrosion resistance inherent to Fittings and its alloys has led to a wide and diversified range of successful applications which demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries.

In the majority of these and other engineering applications titanium has replaced heavier, less serviceable or less cost-effective materials. Designing with titanium taking all factors into account has resulted in reliable, economic and more durable systems and components, which in many situations have substantially exceeded performance and service life expectations.


Titanium Connector Fittings machining possesses similar characteristics to austenitic stainless steel. Although titanium is commonly perceived as challenging to machine, Grade 2 can be machined easily by following the recommended protocol—low cutting speeds, heavy feed rates, generous amounts of cutting fluids, sharp tools and rigid setups.


Some common sizes of Titanium Grade 2 Male Connector are

  1. FAV Titanium Gr 2 Male Connector 1/8” OD x 1/4” NPTM
  2. FAV Gr 2 Male Connector 1/4” OD x 3/8” NPTM
  3. FAV Titanium Gr 2 Connector 3/8” OD x 1/2” NPTM
  4. FAV Male Connector 1/2” OD x 3/4” NPTM
  5. FAV Titanium Connector 3/4” OD x 1” NPTM
  6. FAV Gr 2 Male Connector 6mm OD x 1/4” NPTM
  7. FAV Titanium Gr 2 Male Connector 8mm OD x 1/2” NPTM
  8. FAV Male Connector 10mm OD x 3/4” NPTM
  9. FAV Connector 12mm OD x 1” NPTM

Titanium Connector Fittings

Titanium Pipe Fittings