Introduction to JIC Fittings
JIC Fittings comprises of three precision machined components like Body, Sleeve and Nut. Main construction consists of three pieces: the body, sleeve & nut. The tube end is flared to 74 degrees included angle and held in between the main body nose and the sleeve nut which is on top of them, thus resulting in a very effective leak-proof joint, full flow connection in process tubing. Flare fitting design allows for repeated disassembly and re-assembly with no need to replace any components. A wide range of configurations are available such as straight connectors, elbows, union, tees, and crosses as well as unique special adapters. Standard flare fitting materials include brass, carbon steel, and stainless steel.
FAV range of JIC Fitting work best on high pressure hydraulic applications. JIC Fitting come in variety of styles, shapes and sizes and work on high pressure hydraulic applications.These Fittings are also known as 37 Degree Flare Fitting or JIC Fitting or Flare Fitting.
Material Options for Flare Fittings
FAV JIC Fittings are available in Stainless Steel, Brass, Steel A 105, Monel 400 and Monel 500 , Titanium Gr 2 , Hastelloy C, Incoloy, and Inconel 600 , Super Duplex 2507 , Duplex 2205 .
Sizes table for easy Selection
In JIC Fittings you will get confused between tube size , hose size , dash size , actual size and UNF size . Selecting wrong options will lead to incorrect product and hence always refer to the below table or mail us your inquiry in original form and we will assist you .
|UNF 7/16″ – 20||JIC – 4|
|UNF 1/2″ – 20||JIC – 5|
|UNF 9/16″ – 18||JIC – 6|
|UNF 3/4″ – 16||JIC -8|
|UNF 7/8″ – 14||JIC – 10|
|UNF 1-1/16″ – 12||JIC – 12|
|UNF 1-3/16″ -12||JIC – 14|
|UNF 1-5/16″ – 12||JIC – 16|
|UNF 1-5/8″ – 12||JIC – 20|
|UNF 1-7/8″ – 12||JIC – 24|
|UNF 2-1/2″- 12||JIC – 32|
JIC 4 or Dash Size 4 JIC or 1/4″ JIC Adaptors
JIC 6 or Dash Size 6 JIC or 3/8″ JIC Adaptors
JIC 8 or Dash Size 8 JIC or 1/2″ JIC Adaptors
JIC 12 or Dash Size 12 JIC or 3/4″ JIC Adaptors
JIC 16 or Dash Size 16 JIC or 1″ JIC Adaptors
JIC 20 or Dash Size 20 JIC or 1 1/4″ JIC Adaptors
JIC 24 or Dash Size 24 JIC or 1 1/2″ JIC Adaptors
JIC 32 or Dash Size 32 JIC or 2″ JIC Adaptors
1) International Standards
2) Combine JIC Connection with Variety of end connections of Male / Female NPT, BSPT, BSPP
3) Very effective seal between the fittings and the flared tube
4) Good vibration resistance
5) High Pressure Rating Up to 20000 psi
JIC fittings are engineered to save the user money and time. They are economically priced and provide excellent service as well as longevity. Providing exceptional results and quality service, these 37°flare fittings are favoured by many industries and consistently exceed the user’s expectations
You can also visit our Double Ferrule Compression Tube Fittings section for alternative modes for connecting tubes .