Titanium Branch Tee Male

Titanium Branch Tee Male

Titanium Branch Tee Male, Titanium Compression Fittings

Fav is the manufacturer and exporter of Titanium GR 2 Male Branch Tee which is a part of our titanium compression fitting range.

Standard sizes available are ¼”, 3/8”, ½” & ¾” threading’s available are NPT, BSP, BSPT

Standard sizes for tube side available are ¼” 3/8” ½” ¾” and 4mm 6mm 8mm 10mm 12mm.

Titanium Branch Tee Male Titanium Compression Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate. Ti Grade 2 has also been widely used in marine and chemical applications such as condensers, evaporators, reaction vessels for chemical processing, tubing and tube headers in desalinization plants, and cryogenic vessels. Other uses have included items such as jigs, baskets, cathodes and starter-sheet blanks for the electroplating industry, and a variety of medical application for Titanium Male Branch Tee

You can also visit our Duplex & Super Duplex Fittings & Valves section for alternative modes for connecting tubes.

For Sampling Cylinders click here.

Applications for Titanium Branch Tee Male            

The high strength, low weight ratio and outstanding corrosion resistance inherent to Titanium Compression Fittings and its alloys has led to a wide and diversified range of successful applications which demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries.

In the majority of these and other engineering applications titanium has replaced heavier, less serviceable or less cost-effective materials. Designing with titanium taking all factors into account has resulted in reliable, economic and more durable systems and components, which in many situations have substantially exceeded performance and service life expectations.

Properties of Titanium Compression Fittings

Titanium Compression Fittings machining possesses similar characteristics to austenitic stainless steel. Although titanium is commonly perceived as challenging to machine, Grade 2 can be machined easily by following the recommended protocol—low cutting speeds, heavy feed rates, generous amounts of cutting fluids, sharp tools and rigid setups.

Some common sizes of Titanium Grade 2 Male Branch Tee are

  1. FAV Titanium Gr 2 Branch Tee 1/8” OD x 1/8” OD x 1/8” NPTM (centre)
  2. FAV Gr 2 Male Branch Tee 1/4” OD x 1/4” OD x 1/4” NPTM (centre)
  3. FAV Titanium Gr 2 Branch Tee 3/8” OD x 3/8” OD x 3/8” NPTM (centre)
  4. FAV Male Branch 1/2” OD x 1/2” OD x 1/2” NPTM (centre)
  5. FAV Titanium Male Branch 3/4” OD x 3/4” OD x 3/4” NPTM (centre)
  6. FAV Male Branch 1” OD x 1” OD x 1” NPTM (centre)
  7. FAV Titanium Gr 2 Branch Tee 6mm OD x 6mm OD x 1/8” NPTM (centre)
  8. FAV Gr 2 Male Branch Tee 8mm OD x 8mm OD x 1/4” NPTM (centre)
  9. FAV Titanium Gr 2 Branch Tee 10mm OD x 10mm OD x 3/8” NPTM (centre)
  10. FAV Male Branch 12mm OD x 12mm OD x 1/2” NPTM (centre)

Titanium Compression Fittings

Titanium Compression Fittings