FAV HYDRAULIC VALVES
FAV range of Hydraulic Valves provides reliable connection for High Pressure Hydraulic Environment .
FAV Hydraulic Valves are available in Stainless Steel and Steel.
1) International Standards
2) Specification on par with Global Hydraulic Valves manufacturer
3) High Pressure Rating Upto 10000 psi
Hydraulic valve properly directs the flow of a liquid medium, usually oil, through your hydraulic system. The direction of the oil flow is determined by the position of a spool. A hydraulic system can only function - as per requirements - by using valves. Thus, you should always look for the correct type of hydraulic valve to serve your intended purpose.
Hydraulic valves are available in a variety of sizes. The size required is determined by the maximum flow of the hydraulic system through the valve and the maximum pressure in the hydraulic system. Hydraulic valves are available with different mountings: e.g. mounting in pipe lines, threaded connection as cartridges, subplate mounting, etc.
Different valves function in different ways. Check valves permit free flow in one direction and block flow in the opposite direction. The directional control valve is used to pass on the pressure medium (i.e. flow) in an orderly fashion to a particular direction. Pressure control valves switch (or control) at a certain pressure; the switching pressure may be adjusted on the valve. Flow control valves regulate the flow.This is done by adjusting the size of the bores (orifices).
Note that proportional hydraulic valves and servo control valves may be used to perform a directional control, pressure control or flow control function.
A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves
Most check valves are spring-loaded and use a ball or plate to seal the flow in one direction. Check valves are designed with seats and thus are able to isolate circuits with no leakage.
Every pressure control valve switches (or controls) at a predetermined pressure setting. The switching pressure is generally a variable setting on the valve itself. A change in position of the pressure control valve (i.e. open or closed) occurs either gradually (by control) or suddenly (by switch).
PLEASE SEND YOUR INQUIRY ON firstname.lastname@example.org
- ￭ Double Ferrule Compression Tube Fittings
- ￭ Precision Pipe Fittings
- ￭ Needle Valve
- ￭ Ball Valve
- ￭ Manifold Valve
- ￭ Check Valve
- ￭ Brass Fittings
- ￭ Air Headers
- ￭ Flange to Tube Adapters
- ￭ Gauge Valve , Block & Bleed Valve
- ￭ Bleed Valve
- High Pressure
- ￭ High Pressure Pipe Fittings
- ￭ LP MP HP Type M Fittings
- ￭ High Pressure Valves
- Condensate Systems
- ￭ Condensate Pots
- ￭ Sampling Cylinders
- ￭ Mini Condensate Pot
- ￭ Condensate Vessels
- ￭ Air Distribution Pot
- PTFE Coated Fasteners-Studs,Bolts,Nuts and Springs
- Pressure Relief Valve
- ￭ JIC Fittings
- ￭ Hydraulic Valves
- ￭ Hydraulic Fittings
- ￭ Quick Release Couplings
- Hose and Fittings
- ￭ Stainless Steel Braided Hose
- ￭ High Pressure Hose Assemblies
- ￭ Hoses
- ￭ Hose Fittings
- ￭ Custom Fittings
- ￭ Exotic Fittings
- ￭ Heat Exchanger Plugs
- ￭ Heat exchanger Ferrules and Tube Inserts
- ￭ Pipe Plugs
- ￭ Bug Screen Protector Plug, Vent Protector Mesh Hex Plug
- ￭ Header Plugs for Heat Exchanger
- ￭ Pipe Fittings
- ￭ PTFE Fittings
- ￭ Weld Fittings
- ￭ Adapters Fittings
- Gauges and Accesories
- ￭ Siphon/Syphon Tubes
- ￭ Pipe Tube Clamps
- ￭ Gauge Cock
- ￭ Pressure Gauges
- ￭ Accesories